Vtc 1010 Jumper And Switch Settings; Cmos Clear Switch; Voltage Selector (For Cn10 Connector) - Nexcom VTC 1010 User Manual

Chapter 3: Jumpers and Switches

VTC 1010 Jumper and Switch Settings

CMOS Clear Switch

Connector location: SW2
On
SW2.1 Clear CMOS
SW2.2 Clear ME
Default Settings:
SW2.1 Off
SW2.2 Off
Note: Once CMOS is cleared and the power connector is plugged in, VTC 1010 will power on and
power off automatically in the first Power-On. After first Power-On, VTC 1010 will work normally.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

Voltage Selector (For CN10 Connector)

Connector location: SW6
Off
Normal
Normal
Default Settings:
19
3.3V
SW6.1 Off
SW6.2 Off
SW6.1 Off
SW6.2 Off
3.6V
On
On
VTC 1010 User Manual