Nexcom VTC 1010 User Manual page 84

Appendix E: Vehicle Power Management Setup
Enable Power-on Delay
Delay time can be set at 10sec/30sec/1min./5min./10min./15min./30min./1hour.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
Advanced
Power Management Configuration
** External +12V & By Pass Car Battery Setting **
External Power
[Turn On Both]
** External +12V & By Pass Car Battery Setting **
Input Voltage 9-36V
Startup.Shutdown
[(11.5.10.5)/(23,21)]
**Delay Time Setting**
Power On Delay
Disable
Enable
Power Off Delay
Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Power On Delay Setting
Power On Delay
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
Advanced
Power Management Configuration
** External +12V & By Pass Car Battery Setting **
External Power
** External +12V & By Pass Car Battery Setting **
Input Voltage
Startup.Shutdown
**Delay Time Setting**
10 sec
Power On Delay
30 sec
Delay On Time Selection
01 min
05 min
Power Off Delay
10 min
15 min
30 min
01 hour
Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc.
70
Delay On Time Selection
Setting
[Turn On Both]
9-36V
[(11.5.10.5)/(23,21)]
Delay On Time selection
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
VTC 1010 User Manual