Entering Trap Managers - Paradyne FrameSaver SLV 9x24 Series Installation Instructions Manual

Entering Trap Managers

Now that the FrameSaver unit is connected to the network, SNMP Trap Managers can
be configured.
To enter SNMP managers:
1. Select SNMP Traps configuration options.
Main Menu Configuration
Management and Communication
2. Minimally, enter at least one trap manager – the central site's NMS trap manager:
– SNMP Traps set to Enable.
– Number of Trap Managers
– NMS n IP Address ( n being the first, second, third, etc. trap manager entered)
3. Press Ctrl-a to move the cursor to the bottom of the screen.
4. Type s (Save) and press Enter. The Save Configuration To: prompt appears.
5. Select Current Configuration and press Enter.
6. Press Esc three times to return to the Main Menu.
Helpful Hint:
You can press Ctrl-a, type m and press Enter to return to the Main Menu, or
you can press the Esc key until the Main Menu appears.
Current Configuration
SNMP Traps
14