A Quick Guide To Configuration - Paradyne FrameSaver SLV 9x24 Series Installation Instructions Manual

A Quick Guide to Configuration

The FrameSaver unit should operate using the default (factory-set) configuration
options, with exception to the changes specified in these installation instructions. Refer
to the following table for help navigating the menus.
Press the . . .
Esc key
Tab key, or
Up ( ) and Down ( )
arrow keys
Enter or Return key
Spacebar
As an example, follow these steps to go to the Configuration Edit/Display menu so you
can start setting up the unit:
1. From the Main Menu, press the down arrow key twice so the cursor is on
Configuration.
2. Press Enter to display the Configuration menu. The Load Configuration From menu
appears.
3. Press Enter to select Current Configuration, where the cursor is already positioned.
The Configuration Edit/Display menu appears.
This sequence of steps would be shown as the menu selection sequence:
Main Menu Configuration
In the sections that follow, only the minimum option changes required are included so
you will have a quick and trouble-free installation.
To . . .
Go back one screen or menu level. To see a visual
representation of the menu levels, see Menu Hierarchy in
the FrameSaver SLV 9x24 Quick Reference .
Move the cursor from one menu item to the next.
Complete the menu or option selection.
Display the next available setting when changing a
configuration option. All the available settings for an
option appears at the bottom of the screen.
Load Configuration From:
7
Current Configuration