P&E CYCLONE FX User Manual page 66

@returnvalue
8.2.4.4.7 getLastErrorAddr
uint32_t getLastErrorAddr(uint32_t cycloneHandle);
If the "getErrorCode" function returns a non-zero value (indicating an error has occurred), this
routine can be used to query the address where the error occurred.
@parameter cycloneHandle
@returnvalue
8.2.4.4.8 getDescriptionOfErrorCode
char *getDescriptionOfErrorCode(uint32_t cycloneHandle, uint16_t errorCode);
This function returns a description of the error code.
@parameter cycloneHandle
@parameter errorCode
@returnvalue
8.2.4.4.9 resetCyclone
bool resetCyclone(uint32_t cycloneHandle, uint32_t resetDelayInMs);
This function performs a hard reset of the Cyclone. It is the same as pressing the reset button. This
is considered a legacy call and does not need to be called by the application.
@parameter cycloneHandle
@parameter resetDelayInMs
@returnvalue
8.2.4.5 Configuration / Image Maintenance Calls
8.2.4.5.1 getImageDescription
char *getImageDescription(uint32_t cycloneHandle, uint32_t imageId) ;
This function returns the description of a particular image stored on the Cyclone (internal Flash or
external memory card). This description is specified by the user when the image is created.
@parameter cycloneHandle
User Manual For CYCLONE
The error code of the DLL or Cyclone
The handle of the Cyclone from which to request the error
address.
The memory address where the last programming error
occurred.
The handle of the Cyclone to retrieve the error code description.
The error code to check.
A pointer to a null-terminated character string that contains the
error code description.
The handle of the Cyclone that will be reset.
The reset delay, specified in milliseconds. The delay should be
at least 5500 ms.
True if reset was successful
False otherwise
FX Programmers
The handle of the Cyclone to get an image description.
61