5.2.3.7
Enable/Disable Start Button
This menu option gives the user the option to disable the physical Start Button. Programming can
then be initiated via the Cyclone Control Suite, or by a digital start button on the Cyclone screen if
you have the AUX button set to the "Launch Image Programming" option.
The physical Start Button can always be re-enabled via this same menu toggle.
5.2.3.8
Configure USB Host Device
This menu selection allows the user to either Enable or Disable a barcode scanner connected to
the Cyclone FX's USB Extension Port.
Select Enable to provide power to and turn on a connected barcode scanner. The Enable setting
is persistent. Once Enabled, the scanner will be powered and turned on whenever the Cyclone is
powered. To disable the barcode scanner select Disable.
5.2.4
Status
This menu contains a selection that allow the user to view status information regarding various
aspects of the Cyclone. This menu will likely be expanded with future updates.
5.2.4.1
Show Current IP Settings
Allows the user to view the Cyclone's Current IP Mode, IP Address, Mask, Gateway, and MAC
Address.
User Manual For CYCLONE
(FX Only)
FX
Programmers
33
Need help?
Do you have a question about the CYCLONE FX and is the answer not in the manual?
Questions and answers