Download Count Related Errors; System Hardware/Firmware/Logic Recoverable Errors; Barcode Scanner Errors - P&E CYCLONE FX User Manual

$B005: Error during serial number structure update
$B006: Error: Serial Number structure was not found.
$B007: Error: Serial Number structure is invalid
$B008: Error programming Serial Number to target.
$B009: Error obtain Serial Number from storage.
14.16

Download Count Related Errors

$C001: Error erasing the download counts storage
$C002: Error writing the download counts
$C003: Download counts is over the limit, up to 255 can be supported at a time
$C004: Error trying to convert the download counts structure
14.17

System Hardware/Firmware/Logic Recoverable Errors

$D001: Error: Firmware does not exist
$D002: Error: Firmware update is not allowed
$D003: Error: Firmware update has failed
$D004: Error: There is a firmware mismatch during firmware update.
$D005: Error: Voltage calibration failure.
$D006: Error: Cannot either read or write disk
14.18

Barcode Scanner Errors

$E001: The barcode file for this image is invalid or corrupt.
$E002: The barcode scanned does not apply to a programming image.
$E003: The barcode scanned applies to more than one programming image.
$E004: The barcode scanned exceeds the maximum size of 256 characters. Please make sure
that the scanner adds a Carriage Return Line Feed at the end of a transmission.
$E005: The barcode scanned includes unsupported characters.
User Manual For CYCLONE FX Programmers 133