P&E CYCLONE FX User Manual page 122

into a Sample box. Characters which are selected are indicated by changing the font color to red.
Once a set of characters has been selected, they are copied into Char Test(TYPE): entries by
clicking on the Char Test(TYPE): button. Bulk Copy turns of the selected character
highlighting.
In a similar manner, Char Test(TYPE): entries can be highlighted and copied into Range-1 or
Range-2 entries.
This process takes a little practice to get used to but greatly speeds things up. In addition, this
process can be used to copy entries which do not have down arrows assigned to them.
11.6.6.1.1 Turning On Bulk Copy
Clicking on the black text Set Bulk Copy button in the program control area enables Bulk
Copying. When the Bulk Copy option is selected, the text in the
recolored
11.6.6.1.2 Copy Sample Boxes to Char Test
Figure 11-29 shows bulk copy selected Sample characters selected as indicated by the red type
fonts. After clicking on the Char Test(TYPE): button the Sample characters are transferred as
shown in Figure 11-30. Notice that the Sample highlighting is turned off after the copy.
Figure 11-29: Highlighted Sample entries for Bulk Copy to Char Test(TYPE): entries
Figure 11-30: After Sample entries Bulk Copy to Char Test(TYPE): entries
11.6.6.1.3 Copy Char Test Boxes to a Range
Figure 6.1.3a shows bulk copy Char Test(TYPE): entries selected as indicated by the
fonts. After clicking on the Range-1: button the Char Test(TYPE): entries are transferred as
shown in Figure 6.1.3b. Note that Range-2 entries did not change. However, Char
Test(TYPE): can be bulk copied to Range-2 in a similar manner. Notice that the Char
Test(TYPE): highlighting is turned off after the copy.
User Manual For CYCLONE
red as a reminder to turn the option off by clicking the button again.
Figure 11-28: Program Control Area
FX Programmers
red
button is
Set Bulk Copy
red
font
type
117