Sap Operation Related Errors; Sap Blank Check Range And Module Related Errors; Sap Erase Range And Module Related Errors; Sap Program Byte, Word, And Module Related Errors - P&E CYCLONE FX User Manual

$0061: Undefined header operation
$0062: Operation in algorithm header has failed.
14.4

SAP Operation Related Errors

$0080: SAP operation is not supported.
$0082: Target type mismatch
$0083: SAP operation canceled
$0084: Running algorithm failure
14.5

SAP Blank Check Range and Module Related Errors

$1001: Blank Check is not supported by this algorithm.
$1002: Blank Check algorithm was not found.
$1003: Blank Check operation failed
14.6

SAP Erase Range and Module Related Errors

$2001: Erase error, algorithm not supported
$2002: Erase error, algorithm not found
$2003: Erase error, module failed or canceled
$2004: Erase error, module failed, target is still secured
$2005: Erase error, module not performed, data is preserved
14.7

SAP Program Byte, Word, and Module Related Errors

$3001: Program error, algorithm not supported
$3002: Program error, algorithm not found
$3003: Program operation failed or was canceled
$3004: Program operation failed, write protected
$3005: Program error, Data size exceeds the limit
$300A: Error during reading data range, invalid data length
$300B: Error during reading data range, invalid start address
$300C: Error during reading data range, no target power
$300D: Error during programming data range, invalid data length
$300E: Error during programming data range, invalid start address
$300F: Error during programming data range, no target power
$3010: Error reported while running the custom test application (RT) on the target.
$3011: Error displaying feature
$3012: Error programming feature
$3013: Error overlaying feature
$3014: Error: Run Test Operation terminated
$3015: Error: Run Test Operation over character limit 255
$3016: Error run test operation failed
$3017: Error: unable to allocated memory during run test.
$3040: Error: Program may cause the device to be secured permanently
User Manual For CYCLONE FX Programmers 130