Teldat T200 Installation Manual page 12

1 Installation
START FROM FLASH
BIOS CODE DUMP.....................
BIOS DATA DUMP....
End of BIOS dump
Boot-stack used: 0x00000788
Boot-stack free: 0x00001878
====================================================================
BIOS TELDAT
====================================================================
BIOS CODE VERSION: 02.09
CLK=262144 KHz
Date: 01/01/00, Monday
SDRAM size: 128 Megabytes
BANK 0: 128 Megabytes (detected)
I_Cache: ON
D_Cache: ON
FLASH: 16 Mb.
NVRAM: 128 Kb.
EEPROM: 2048 Bytes.
DPRAM: 8192 Bytes.
FAST ETHERNET 1
SWITCH 10/100
SECURITY ENGINE
PCI device: Host bridge
(Bus: 0, Device: 0, Function: 0)
(Vendor: 0x1057, Device: 0x18C1)
(Subs. Vendor: 0x0000, Subs. Device: 0x0000)
Current production date: 08 36
Current software license: 19 12
S/N: 661/06453
BIOS MAC Add: 00-a0-26-b0-19-35
>>
........
TRYING APP CODE DUMP
(CONFIGURED) APPCODE1.BIN ver.: 0.10.7.26 0.0.0.0 .........................................................
...........................................................................
................................................................
APP DATA DUMP......................................................
Bios-stack used: 0x14B8
Bios-stack free: 0x2B48
Aux-stack used: 0x0
Aux-stack free: 0x2000
Running application
[Default configuration used | Empty configuration used]
Parsing text mode configuration ...
Configuration parsed
Initializing
Press any key to get started
At this point, return microswitch 5 to the OFF position (you don't need to turn off the device). The next time you re-
start the device, the saved configuration will run.
8
BUSCLK=65536 KHz PCICLK=32768 KHz
Time: 00:00:06
Write-Back
(c)Teldat
L0
Teldat S.A.
Teldat T200 Router Family