Mounting (For Lengths <500 Mm Only) - Renishaw ATOM Installation Manual

RTLF tape scale:
Mounting
(for lengths <500 mm only)
1
Thoroughly clean and
degrease the
substrate.
4
Support
dowels
Location ledge
ATOM
linear installation guide
2 Remove backing paper from scale.
or
5 Clean scale using Renishaw scale cleaning wipes
(A-9523-4040) or a clean, dry, lint-free cloth.
3 Locate scale against dowels or ledge
and rotate down onto substrate. *
* If dowels or ledge are permanent, their maximum
height above substrate is 0.6 mm.
6 Install datum clamp, end covers and
deselect reference marks as
detailed on page 8.
7 Remove temporary dowels
(if fitted).
6