Installation - Midea MHC60SS Instructions Manual

INSTALLATION

WALL DRILLING AND BRACKET FIXING
B
A
C(solution2)
As a first step, proceed with the following drawings:
l line up to the ceiling or up to the upper limit, at the center of the area in which the hood is

to be fitted.
A horizontal line A at 980 – 1080 mm above the cooker top.

A horizontal line B at a X mm above the horizontal line A.

A horizontal line C at a 261 mm below the horizontal line A (solution2).

Mark Points:
Mark a point (1) on the horizontal line A, 80 mm to the right of the vertical reference line.

Repeat this operation on the other side and on the vertical reference line, checking that the

three marks are leveled.
Mark a point (2) on the horizontal line B, 40 mm to the right of the vertical reference line.

Repeat this operation on the other side , checking that the two marks are leveled.

Mark a point (3) on the horizontal line C, 180 mm to the right of the vertical reference

line (solution2).
Repeat this operation on the other side , checking that the two marks are leveled.

Fix the brackets :
Drill at the marked points (1)、 (2)、 (3)(solution 2), using a ɸ10 mm drill bit.

Insert the Wall Plugs 11 into the holes (1)、 (2) 、(3)(solution2).

Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) at the horizontal line A.

Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) at the horizontal line B.

40
(2)
40
80 80
(1)
180 180
(3)
Option Chimney
1
2
3
5
X
/
400+0
400+300 390-620
400+390 390-710