Midea MHC60SS Instructions Manual page 10

Remove the grease filter and carefully remove the 2 screws from the front plate (a cross

headed screwdriver will be needed to remove the screws).
Disconnect the terminal of LED light.

Press LED light on the back of the front plate, take the LED light out.

Replace the lamp(commercially available LED lamp (max.1.5w).

Round/ Diameter
: 70mm
Reinstall LED light module
Press LED light on the front of front plate, install the LED light on the front plate.

Connect the terminal of LED light and light leads.

Carefully fasten the 2 screws on the front plate ,reinstall the grease filter.

Max Power Voltage
1.5W DC 12 V
Picture
10
Lamp Cap ILCOS D code
——
DSR-1.5-S-70