Setting Table Of Parameterization - wtw LF 170 Operating Instructions Manual

Operation
Overview of the settings
(main level)
General operating
instructions
96

4.5.2 Setting table of parameterization

Display Description
Pr1
Current output 1
Pr2
Current output 2
PL
Relay limits
PIF
RS 485 interface
PCd
Password protection
Pt
Temperature balancing
Ptr
Reference temperature
PtF
Temperature compensation
PCS
Timer function
x Menu appears for the corresponding instrument variant
1)
For relays that are configured as limit indicators
2)
Menu only appears if the conductivity ( ) measuring mode is selected
The starting point for the settings is the start display of the
parameterization level (see section 4.5.1):
P A
Operation:
Navigate in the main level to the next or previous setting with
<UP><DOWN>. The entry level with further settings is reached by
subsequently pressing <ENTER>.
In the entry level select the desired value from the selection in each
case with <UP><DOWN> and confirm this with <ENTER>. This puts
the setting into effect and you go to the next setting or return to the
main level.
Certain settings or choices depend on the instrument variant or
specific configuration settings. Settings that are not available will be
1)
2)
2)
Switch to the first setting of the
main level with <ENTER>.
LF 170
Instrument version
Stan- RT RT RS
dard
x x
x
x
x x
x x
x x
x x
x
ba54104e09 11/2010
x
x
x
x
x
x
x
x
x