Connecting A Conductivity Measuring Cell; Measuring Cell Types And Connection Options; Measuring Cells With 7-Pin Plug Adapter - wtw LF 170 Operating Instructions Manual

Installation
Measuring cell
®
TetraCon 700
®
TetraCon 700 (SW)
LRD 01
LRD 325
®
TetraCon 325
®
TetraCon 325/C
LR 325/01
LR 325/001
®
TetraCon DU/T
®
TetraCon DU/TH
Connection
82
3.4

Connecting a conductivity measuring cell

3.4.1 Measuring cell types and connection options

Note
Ordering information on the respective articles (connection cables,
adapters, terminal boxes etc.) is given in chapter 7 A
Connection type
Connect the plug adaptor of the
connection cable with the sensor input
socket
Connect the conductivity measuring cell
to the sensor input socket using an
adapter
Connect the conductivity measuring cell
to the sensor input socket using a
connection cable and an adapter

3.4.2 Measuring cells with 7-pin plug adapter

This section describes the connection of the following conductivity
measuring cells:
®
TetraCon 700
®
TetraCon 700 (SW)
LRD 01
LRD 325
Connect the plug adapter of the sensor connection cable with the
sensor input jack of the monitor:
CCESSORIES
Connection cable/
adapter
-
ADA/AMPH-LAB-LF
KKDU 325 +
ADA/AMPH-LAB-LF
ba54104d09
LF 170
.
See
page
82
83
83
11/2010