Audio Configuration; Source Profiles - Axia iQx AES67 Installation & User Manual

Audio Configuration

Chapter 3 |
19
3
Audio Configuration
In the iQx console, we use profiles to categorize audio that is already in the network and to define the behavior of the console.
The iQx uses Source Profiles to define the audio inputs to the console. The use of Show Profiles is to define the layout of the
console and in some cases how the console is to be used. As for returning audio into the network, there is a very flexible and
easy-to-understand setup. This chapter will cover these three items, Source Profiles, Show Profiles, and Audio Output.
It should be noted that you access the main configuration of the iQx with a browser application (same used to surf the
internet) and typing the IP of the iQx in the address (URL) field. When an authentication window appears, type in user in the
username field and leave the password field blank. This is the default password to the iQx.

Source Profiles

The Source Profile configuration is accessed through a link on the left side column, Sources. Pressing this link will change the
view to the right of the menu. A fresh iQx will have no profiles and the view would be rather bland. The first step is to select the
appropriate source type from the drop down, followed by the Create button.