Editing Show Profiles - Axia iQx AES67 Installation & User Manual

Audio Configuration Chapter 3 |
26

Editing Show profiles

Show Name
A seven character friendly name for the operators to ID their desired profile.
Fader Channels
A table that represents the amount of fader channels enabled in the system. Each row represents a chanel and the options are
to select a source profile (A) that loads when the show is called. Use the drop-down to select from the source profiles that have
been enabled for the channel.
In the center (B) the row is divided into two rows. The top row is for enabling the option at show profile load, while the bottom
is for locking the state so the operator is not able to make changes to the item. The control items here are the ON state of the
channel and the four PGM mix buttons. If the first PGM was checked at the top and bottom, at show load the Program 1 mix
would be engaged and the operator would not be able to disable the state of the Program mix.
The Group Start (C) section links channel ON states. Define as many Master and Slave channels. ON state changes on a Master
will reflect in all other Master or Slave channels.