Backup & Restore; General System Setup; Code Updates - Axia iQx AES67 Installation & User Manual

System Configuration Chapter 5 |
55
Backup & Restore
All the hard work in setting up profiles and the smaller details are saved in a configuration backup file which can be downloaded
from the Backup / Restore link. From the same page, a backup file can be selected and uploaded into the system. A backup is a
recommended step after first install and after any major changes to the configurations. A standard practice is to also grab a
backup prior to any system update.
At the bottom of the options is also a Factory Reset button. This clears most things.

General System Setup

The Setup link provides Network configuration items which some of this should already be in place if you are accessing the
setup page. Items that could use some work might be the Hostname (defaults is last three octets of MAC number) or clean up of
the items that are setup from the front panel.
The setup page provides password control configuration. The default password is no password (blank). If it is desired to
change the password, it is entered here twice.

Code Updates

The system has two banks for software. These are found at the Setup link.
To upload a new version to the system, first select the Choose File button to select the new package from the computer. Once
selected, press the Upload Image button to load to the non active bank. When ready, select the other bank and press Change
active bank. This will cause the system to boot into the other bank. All audio will stop for 45 seconds.