Device Control Connections And Configuration - Extron electronics IPL Pro Series User Manual

Device Control Connections and Configuration

• Verify that ports are wired correctly and that ground (earthing) wires are connected to
the proper pins on the control processor and, if applicable, on the controlled device.
• Ensure that each IR emitter head is placed adjacent to or directly over the IR pickup
window on the controlled device.
• Verify that the appropriate drivers were used while creating the GC Professional or
GC Plus configuration file and that the correct commands and signal types (IR, RS-232,
Ethernet) are associated with the appropriate ports on the IPL and on the other devices.
• Verify that input current at any contact input port does not exceed 250 mA.
If you are still experiencing problems, call the
Hotline or the Extron S3 Control Systems Support Hotline (1.800.633.9877).
Extron S3 Sales & Technical Support
IPL Pro Series • Software-based Configuration and Control 30