Test And Troubleshoot - Extron electronics IPL Pro Series User Manual

… Using GC, create a new GC Professional or GC Plus project and configure the
control processor and other IP Link Pro devices. The configuration tells the control
processor:
• how its ports function
• how to control other products
• which touchpanels to interact with
…
Configure ports on the control processor.
…
…
… Set up monitors, schedules, macros, and local variables.
…
Add touchpanels and set them up:
…
…
… If not using GC Professional or GC Plus, use Global Scripter to program the
control system as desired.
… Program ports on the control processor.
…
…
…
Add touchpanels and set them up:
…
…
…
Save and build the project.
…
Upload the system configuration to the control processor.

Test and Troubleshoot

…
Test the system. See the
of items to check during system troubleshooting.
…
Make adjustments to wiring or configuration as needed.
… Select device drivers and link them to each serial, IR/serial, or Ethernet port.
Select settings (serial protocol, relay behavior, contact input behavior) as
…
needed.
… Upload the GUI configuration to the touchpanels using Global Configurator.
Assign any appropriate functions, monitors, or schedules to the touchpanels
…
and their buttons.
Program each serial, IR/serial, or Ethernet port.
…
… Program relay behavior and contact input settings as needed.
… Upload the GUI configuration to the touchpanels.
Program functions, monitors, or schedules to the touchpanels and their
…
buttons.
Troubleshooting
IPL Pro Series • Hardware Features and Installation
• what to monitor
• when to do things
• whom to notify, how, and under what
circumstances
section starting on page 29 for an outline
9