DR300 Operator Manual
Setting Power Supply
Plug in power cable to main body socket then the outlet socket.
Supply Power
Turn power switch on. Push the switch on the side labelled [-].
When the power is switched on, initial startup message [Manual Print Mode] is displayed
on the touch screen.
Switch off Power Switch
The following must be done before power off:
• Confirm printer is not in action (idling).
• Stop or pause any printing process before power off.
Do not operate power switch or plug in / out power cable with wet hands to avoid
electrocution.
CHAPTER 5
Power Supply
Chapter 5 - Power Supply
26