Graphic Data Transmission; Data Id Transmission - SATO DR300 Operator's Manual

DR300 Operator Manual

8) Graphic data transmission

Transmit graphics data directly to graphic field.
*1: When transmitting graphic data to printer, sequential numbering function of printer
cannot be utilized.
*2: Graphic can be stores in PC card using <D> command to indicate the register number
(3 digits). Stored graphic can be retrieved.
*3: Each graphic size must not exceed 26 kilobytes.
<GM> [1Bh, 47h, 4Dh] NN DDDDD, nnn......
E Field
S D
C N N D D

9) Data ID transmission

This command registers ID information in status-3 communication mode. If omitted
when transmitting, the returned status will be blank.
<ID> [1Bh, 49h, 44 h] NN
ID
E NO.
S ID
C N N
Graphic Separator
,
D D D
Chapter 9 - Online Programming
BMP data
54