Pdf417 Code - SATO DR300 Operator's Manual

DR300 Operator Manual

PDF417 Code

Digit Designated Item
Position
1 Field Designation
2 Field Designation
3 Mode
4, 5 Vertical Position
6, 7
8, 9 Horizontal Position
10
11 Rotation
12, Module Vertical Dot
13 Count
14, Module Horizontal Dot
15 Count
16 Error Correction
17, 1 Line Data Digit Count
18
19 ~ Reserved
* Module
To define the dot size:
1. Recommended to specify the vertical to horizontal dot ratio of 1:3 for better
readability by the scanner.
2. It is possible to define vertical dot (01, 02, 03), horizontal dot (01, 02, 03) but
there might be difficulties decoding fields.
3. Use the larger module for better printing quality.
Error Correction
To define the corrective level when bar code is damaged or tampered.
1. Higher corrective level provides better correction and reading.
2. Higher corrective level will increase barcode size.
Chapter 9 - Online Programming
Designated Description
4 : 2D Bar Code
0 : PDF417
0 : [0] Fixed
0000 : Input only and no printing field
0001 ~ 2848 : Vertical position (dot)
001 ~ 640 : Horizontal position (dot)
0 : 0º
1 : 90º
2 : 180º
3 : 270º
01 ~ 24 : Minimum module for vertical dot
(*refer to module size notes)
01 ~ 09 : Minimum module for horizontal dot
(*refer to module size notes)
0 ~ 8 : Security Level
00 ~ 03
All [0]
63