Input Check Designation (Normal); Sequential Numbering - SATO DR300 Operator's Manual

DR300 Operator Manual

Input check designation (Normal)

1 Normal, alphanumeric character
Digit Designated
Position
18 Input check 1
19 Input check 2
20 Bold Font
21 Reserved

Sequential numbering

1 Normal, alphanumeric character
Digit Designated Item
Position
22 Sequential function
23, 24
25, 26
27, 28, Step (increase, decrease)
29
30, 31 Repeat quantity
32-39 Minimum data range
40-47 Maximum data range
* Sequential numbering is for numeric data only.
Item
0 : when online mode
0 : when online mode
0 : None
1 : Right
2 : Lower
3 : Right & Lower
0
Start Position
Data Count
Chapter 9 - Online Programming
Designated Description
Designated Description
0 : No
1 : Increment
2 : Decrement
01~40 : starting position
01~08 : data count
001~999 ; sequential step
01~99 : same number repeat quantity
00000001~99999999 :
For incremental numbering, the wrap
around value when it reaches the
maximum value.
For decrement numbering, the minimum
value.
00000001~99999999
For incremental numbering, the
maximum value.
For decrement numbering, the wrap
around value when it reaches the
minimum value.
56