DR300 Operator Manual
[10] Factory Mode
FACTORY
MODE
FACTORY
NON
FACTORY
PRINT
To enter this mode, set DIPSW 2-5 to ON position. Open thermal print head, power on
while pressing both <FEED> and <LINE> keys. Release both keys when buzzer beeps.
The LCD display will show "HEAD OPEN" message, close the thermal print head and
"FACTORY MODE" will be displayed. Set DIPSW 2-5 top OFF position.
NON
Press <LINE> key to confirm the clear item.
Press <FEED> key to print a test sample.
Press <FEED> key to stop/pause printing.
ALL, HED, CUT
ALL
HEAD
Chapter 8 - Operation Panel
CUT
45