Cutter Replacement; Stacker Option - SATO DR300 Operator's Manual

DR300 Operator Manual
Replace cutter unit when blade becomes blunt and cut edges are rough. (Please contact
the sales outlet where you purchase the DR300.)
• Paper thickness 0.1 mm – 0.26 mm
• Accuracy of cuts is ± 1.5 mm
• Paper pitch 25 – 181 mm
• ± 1 mm from perforation is non-cut area
Stacker
• Set Stacker in front of the cover of the printer main body as shown in the
following drawing.
• Attach the stacker to the front cover of the printer main body as shown in the
arrow direction.
Stacker
Chapter 4 - Setting of Label and Carbon Ribbon

Cutter Replacement

Stacker Option

23