Bar Code Command - SATO DR300 Operator's Manual

DR300 Operator Manual
2D Bar Code Command
2D barcode is only valid for Online mode. When setting data for PDF417, VeriCode,
DataCode. Use:
<BA> if data contains control code.
<BB> if data doesn't contain control code.
<BB> command syntax contains data byte count to prevent the printer from
misinterpretation of the 2D barcode data.
<BA> field number data
<BB> field number data count, data
Use: <BQ> command for QR code
<BQ> Field number QR parameter QR data
2D Bar Code Type and Command Table
Bar Code Type
PDF417
VeriCode
Data Code
Maxi Code
QR Code
Data Command
<BB>
<BA>
<BA>
<BA>
<BQ>
Chapter 9 - Online Programming
Maximum Data Count
2681 bytes
196 bytes
500 bytes
93 bytes
7089 bytes
69