Command Specification; Command Summary; Initial Designation Command; End Designation Command - SATO DR300 Operator's Manual

DR300 Operator Manual
Command images are as follows:
STX
Command
ETX

COMMAND SPECIFICATION

1) Command summary

Command Detail
<A>
<M> d d
<L> d d
<D> d d . .
<Q> d d d d
<ID> d d
<GM> d d
<T1H> d d
<T2H> d d
<Z>

2) Initial Designation Command

STX <A> [02 H, 1B H, 41 H]
Command shows start of data transmission.
Communication error and transmitted data before reception of this command will be
ignored.
*For errors, like receiving uncontrollable symbol in case circuit on the host side is open/
closed, no error message will be displayed until error reception reaches 500 times.

3) End Designation Command

<Z>, ETX [1 BH, 5 AH, 03 H]
Command shows end of the data transmission.
Transmit media information, field information, print quantity, before transmitting this
command.
Initial designation
End designation
Description
Designates start of data transmission.
Designates information concerning the entire printing, such as paper
information, etc.
Designates transmission of field parameter.
Designates transmission of field data.
Designates No. of labels to be issued.
Designates printing ID (Status-3 only).
Designates graphic data (BMP).
Custom designed character registration (16x16).
Custom designed character registration (24x24).
Designates end of data transmission.
Chapter 9 - Online Programming
Printing Designation
47