Setting Rolled Paper With Optional Accessories; Dispenser Option - SATO DR300 Operator's Manual

DR300 Operator Manual

Setting Rolled Paper with Optional Accessories

Dispenser Option should only be fitted by qualified SATO staff
Setting Label
• Open Cover
• Set Label
• Open thermal head by raising Head Lock Lever
• Pull up Pressure Bracket of dispenser unit once, then pull down.
• Set label
• When setting label on dispense unit, peel 3 to 4 labels from backing paper
and pass the backing paper under the Pressure Bracket as shown below.
• Lock the print head after label is set, then close the Pressure Bracket.
Chapter 4 - Setting of Label and Carbon Ribbon

Dispenser Option

19