Perform Test Printing; L" Selection For Large Label Size Paper - SATO DR300 Operator's Manual

DR300 Operator Manual

[4] Perform Test Printing

To enter this mode, power on printer while holding down <FEED> key.
"S" selection for this small label size paper.
Head check pattern is printed in designated paper width (4-8cm).
TEST PRINT
S L
FEED Key
PR. WIDTH
04 CM
FEED Key
TEST PRN
PRINTING

[5] "L" Selection for Large Label Size Paper

Head pattern and printer information will be printed.
TEST PRN
S L
FEED key
TEST PRN
PRINTING
Press <FEED> while power on printer, buzzer sounds and press <LINE> key to change
to "L", then press <FEED> key to confirm selection.
Start test printing by pressing <FEED> key.
LINE Key
Chapter 8 - Operation Panel
38