Media Size - SATO M-8400RVe Operator And Technical Reference Manual

Section 5: Programming Reference
Command Structure
Command Function
Input to Printer:
Printer Output:
Special Notes
Page 5-56

Media Size

<ESC>A1aaaabbbb
aaaa = Label Width in dots (0 to Hmax)
bbbb = Label Length in dots (0 to Vmax)
Example: <ESC>A108323200
Placement: Separate data stream to the printer.
Default: <ESC>A108322136
To set the size of the media.
<ESC>A
<ESC>A108321424
<ESC>Z
Ther is no printer output resulting from this command. It is used to
automatically adjust the offset values for the size of label being used.
The sample command stream specifies a label 832 dots wide by 1424
dots long.
1. The Base Reference point is always the on the right (looking at
the front of the printer) side of the print head. This command
adjusts the Base Reference Point to correspond with the right
edge of the loaded media.
2. If the label size is changed, then this command must be
respecified to center the print image on the label.
3. All eight variables ("aaaa" and "bbbb") must be included in this
command.
Maximum
Hmax
aaaa
Vmax
Default bbbb
Expanded bbbb
PN 9001075A
M-8400RVe
0832
1424
9999
SATO M8400RVe