Table of Contents
Advertisement
1.2.1 Back Panel
Input Connectors
BNC – CVBS
9.11.13
Standard CVBS signals can input.
DP
10.12
Standard DisplayPort signals can input.
DB15 – VGA
15.17
Standard VGA signals can input. Additionally this VGA port supports Component
(YPbPr) with the use of a VGA to Component adapter (supplied).
DVI-I – DVI
14.16.18
Standard DVI signals can input. The DVI port supports up to HDMI 1.3 if the port
format is set to HDMI.
BNC – 3G-SDI
20
Standard 3G-SDI signals can input.
Audio Connectors
26
Connect to the device with audio output connectors.
Output Connectors
BNC – 3G-SDI Loop Out
21
Connect to the SDI input of the next VSP 5360 or the device with SDI input.
DVI-I – DVI
22.23
Connect to the monitor or LED display which has DVI interface. (This connector does
not support hotplug).
DB15 – VGA
24.25
Connect to the monitor or LED display which has VGA interface. (This connector does
not support hotplug).
VSP 5360
User Manual
Chapter 1: Your Product
8
Advertisement
Table of Contents
