Table of Contents
Advertisement
3. Push the rotary to confirm. Turn the rotary knob, select <CUSTOMIZED>, push the knob to
confirm.
4. Enter digits of desired resolution by pushing the red number buttons. For example, input 1536
as following:
5. After the digital, push the rotary knob will add ×, means before × is the horizontal size. Same
operation for vertical size, For example, input 1536 as following:
6. After the digital, push the rotary knob will add ×, means before the × is the vertical size, and
after the × is the refresh rate. Only digital 50 or digital 60 supports for the refresh rate. For
example, input 60 as following. Use the digital buttons to finish the settings.
7. After input all the values, push the rotary knob to enable VSP 5360 to output this resolution.
VSP 5360 will take 5~10 seconds to enable this output resolution.
VSP 5360
->COMMON FORMAT
OTHERS FORMAT
CUSTOMIZED
GENLOCK
CUSTOMIZED
->1920×1080×60
CUSTOMIZED
*1536×
CUSTOMIZED
*1536×1536×
CUSTOMIZED
->1536×1536×60.0
User Manual
Chapter 3: Using Your Product
>>
>>
>>
OFF
31
Advertisement
Table of Contents
