Add Or Clear The Layer - RGBlink VSP 5360 User Manual

3.7 Add or Clear the Layer

Push any button of A, B, C, D in LAYERS area, or push all the 4 buttons, the button light is on, and
the layer is selected, add layer finished.
For example, add layer B, push button B, button B light is on, and the OLED panel shows as
follows:
In LAYERS area, push any key of button A, B, C, D that to clear, the button light flashes. Push the
button again, key light is off, and clear layer finished.
For example, clear layer B, OLED panel shows as follows:
VSP 5360
ON LAYER B
H POS : 0
H SIZE: 1024
OFF LAYER B
User Manual
Chapter 3: Using Your Product
V POS : 0
V SIZE: 768
32