Installing Options - RGBlink VSP 5360 User Manual

Chapter 7: Appendix

7.3 Installing Options

VSP 5162PRO, VSP 5360 and VSP 628PRO are based on module based structure, user can install
or replace the optional module according to actual need. The installation steps of VSP 5162PRO,
VSP 5360 and VSP 628PRO are the same. Here we take VSP 628PRO for example, specific steps
are as follows:
Install the Optional Module
1. Disconnect the power and all the signal and control cables.
2. Unscrew the 5 fixed screws on the top panel and remove the top panel (Figure 1):
(Figure 1)
3. Unscrew the 2 fixed screws on input optional module slot, and pull out the input block (Figure
2):
VSP 5360 User Manual
73