Table of Contents
Advertisement
Chapter 4: Controlling Your Processor Remotely
layer, size and position.
buttons
correspond with program channel, and program output image can be switched by these button.
User can adjust the program image by setting the size and position.
Basic
Interface is as follows:
Choose different output resolutions by selecting from scrolling down list:
Custom format setting.
User can choose enable or disable the Full Screen, Output Synchro.
Set the X, Y, Width and Height according to actual need. Click Set after finish. If image quality
distorts by improper operation, it can be recover by reset.
Set the alpha, the setting range is among 0 to 128.
Enable or disable the PIP function, VSP 5360 supports 12 kinds of PIP modes.
Fade time setting.
Layer
Add or clear the layer by selecting Layer 1, Layer 2, Layer 3 or Layer 4.
VSP 5360
User Manual
50
Advertisement
Table of Contents
