Table of Contents
Advertisement
The horizontal position of the device when do split.
START Y
The vertical position of the device when do split.
H TOTAL
The total width points of LED display that will split.
V TOTAL
The total height points of LED display that will split.
FIRST HEIGHT
VERTICAL 1/2
The height of the device when do split.
START X
The horizontal position of the device when do split.
START Y
The vertical position of the device when do split.
3.3.6 Input Setup Menu
->PROGRAM SWITCH
->ADC ADJUST
PROGRAM
Enable or disable the program switch function.
SWITCH
INPUT CHECK
Enable or disable the input check function.
LAYER A 90 ROTATE
Select NO ROTATE, LEFT ROTATE or RIGHT ROTATE.
LAYER A MIRROR
Select NO MIRROR, H MIRROR, V MIRROR and IMAGE MIRROR.
OUTPUT
LAYER B MIRROR
IMAGE
Select NO MIRROR or H MIRROR.
SETTING
LAYER C MIRROR
Select NO MIRROR or H MIRROR.
LAYER D MIRROR
Select NO MIRROR or H MIRROR.
H POS
Set the horizontal position.
VGA ADJUST
V POS
VSP 5360
INPUT CHECK ON/OFF
OUTPUT IMAGE SETTING
VGA ADJUST
>>
SDI ADJUST
OPTION INPUT ADJUST
User Manual
Chapter 3: Using Your Product
OFF
OFF
>>
>>
>>
>>
20
Advertisement
Table of Contents
