Screen Size Setting; Vsp 5360 User Manual - RGBlink VSP 5360 User Manual

Chapter 3: Using Your Product

3.13 Screen Size Setting

VSP 5360 supports the screen parameters to meet the requirement where user want to switch
between scale screen size and full display size (like monitor). This is only enable for a single
display window. Following is an example of a screen size is1408 x 832.
Operator can defined the VSP 5360 output resolution from standard output resolution list or
customized the output resolution which is higher than 1408 x 832. For this application 1440x900
is an example:
Push the [MENU] button to go into the menu items, turn the knob and choose <SCREEN
PARAMETERS>, push the knob and goes into the screen menus as following:
SCREEN H SIZE--Horizontal pixels, turn knob or use the digital button to input the value1408.
SCREEN V SIZE--Vertical pixels, turn knob or use the digital button to input the value 832.
SCREEN H POS--Horizontal position, default value is 0, set the value as the way of H SIZE and V
SIZE.
SCREEN V POS--Vertical position, default value is 0, set the value as the way of H SIZE and V SIZE.
MODE-- Mode option, choose SCREEN SIZE.
VSP 5360 User Manual
38