Table of Contents
Advertisement
3.12 LOGO Capture
1. Push the [MENU] button and enter to the menu items, turn the knob, and select <SYSTEM>,
push the knob to confirm, turn the knob, and select <LOGO CAPTURE> option, OLED shows as
follows:
2. Select the input source.
3. Freeze image, when capture LOGO, the program image should be frozen.
4. Set the LOGO horizontal position, vertical position, horizontal size and vertical size.
5. Save the image to LOGO1 or LOGO2.
6. Start to capture LOGO.
Note
VSP 5360
->SELECT INPUT
FREEZE IMAGE
H POS
V POS
->H SIZE
V SIZE
SAVE TO
START CAPTURE LOGO
The [LOGO] button can also fulfill this setting.
User Manual
Chapter 3: Using Your Product
LOGO
OFF
0
0
1024
768
LOGO 1
37
Advertisement
Table of Contents
