Table of Contents
Advertisement
3.14 DSK Setting
Before setting the text overlay, please make sure the input channel of the text. For example,
select DVI3, the operations are as follows:
1. Push the [DVI3] button, and make sure there is input signal, and OLED shows DVI3 signal.
2. Set the size and position of DVI3: Push the [DVI3] button in PRE area, the button light is on, and
the image can be edited, push the [Scale/Position] button to set the size.
3. Select the input signal that will overlay in PRE area.
4. Push the [DSK] button, and open the DSK function.
Turn the knob and select <PRESET>, push the knob to confirm, select the preset mode of DVI3,
for example, WhOnBk2, push the knob to confirm.
5. Push the [SAVE] button, and save the above settings.
VSP 5360
->H SIZE
V SIZE
H/V
H POS
->V POS
FAST SCALE MODE
RESET
->DSK
SELECT INPUT
PRESET
ALPHA
DSK
SELECT INPUT
->PRESET
ALPHA
User Manual
Chapter 3: Using Your Product
1920
1080
1920
0
0
FULL SIZE
ON
DVI3
USER
0
0
DVI3
WhOnBk2
0
39
Advertisement
Table of Contents
