Electrical Installation - American Standard Selectronic 606B.X10 Installation Instructions Manual

ELECTRICAL INSTALLATION

STANDARD BATTERY POWER
7
KIT (PK00.CRP); Fig. 9, 9a
1. Connect one end of the 27" EXTENSION CABLE (1)
to a SENSOR CABLE (2) and install the CONNECTOR
LOCKING DEVICE (10). Connect the other end of the
27" EXTENSION CABLE (1) to the SOLENOID CABLE
(3). Fig.9.
2. Insert BATTERY (6) into BATTERY HOLDER (7), making
sure terminal side is inserted first. Fig.9a.
3. Connect BATTERY HOLDER (7) to available SENSOR
CABLE (5) and install the CONNECTOR LOCKING
DEVICE (7). Place BATTERY HOLDER (7) into electrical
box. Fig.9a.
PWRX POWER KIT (PK00.WRK);
7a
Fig. 9, 9a
1. Connect one end of the 27" EXTENSION CABLE (1)
to a SENSOR CABLE (2) and install the CONNECTOR
LOCKING DEVICE (10) on battery - sensor connection.
Connect the other end of the 27" EXTENSION CABLE
(1) to the SOLENOID CABLE (3). Fig.9.
2. Insert BATTERY (6) to available SENSOR CABLE (5).
Place BATTERY (6) to electrical box. Fig.9a.
Fig. 9
Fig. 9
10
10
2
2
Fig. 9a
Fig. 9a
5
5
4
4
TERMINAL SIDE
TERMINAL SIDE
6
6
7
3
3
1
1
7
7
M965643 Rev. 1.6 (11/16)