Image Level Selection - Sanyo PLC-SE20 Owner's Manual

Image Level Selection

Direct Operation
Select an image level among Standard, Real, Image 1, Image 2, Image
3, and Image 4 by pressing the IMAGE button on the remote control.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
IMAGE 1~4
User preset image in the Image Adjust Menu (p30).
Menu Operation
1
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Image Select Menu icon.
2 Press the Point Down button to move the red frame pointer to
the level that you want to set and then press the SELECT
button.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
IMAGE 1~4
User preset image in the Image Adjust Menu (p30).
IMAGE button
Standard
Real
Image 1
Image 2
Image 3
Image 4
Image Select Menu
Image Select Menu icon
Move the red frame pointer to
the level and press the
SELECT button.
The level being selected.
Computer Input
29