Image Level Selection - Sanyo PLC-SW36 Owner's Manual

Image Level Selection

Direct Operation
Select an image level among Dynamic, Standard, Real,
Blackboard(Green), Image 1, Image 2, Image 3, and Image 4 by
pressing the IMAGE button on the remote control.
Dynamic
Picture level suitable for viewing a picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard. This
mode helps to enhance the image contrast projected on the
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Image 1~4
User preset image in the Image Adjust Menu (p30).
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Press the Point 7 8 buttons to move the red frame pointer
to the Image Select Menu icon.
2 Press the Point button to move the red frame pointer to
d
the desired level and then press the SELECT button.
Dynamic
Picture level suitable for viewing a picture in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a blackboard.
See above for further details.
Image 1~4
User preset image in the Image Adjust Menu (p30).
Remote Control
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Select Menu icon
Image Select Menu
Move the red frame pointer to
the desired image level and
press the SELECT button.
The image level being selected.
Computer Input
IMAGE button
29