Image Level Selection - Sanyo PLC-XTC50L Owner's Manual

Image Level Selection

Press the MENU button to display the On-Screen
1
Menu. Use the Point
frame pointer to the Image Menu icon.
Use the Point
2
pointer to the desired image level and then press the
SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
(This icon is displayed with the computer signal.)
Cinema
Picture mode adjusted with fine tone.
(This icon is displayed with the video signal.)
Image 1–4
For viewing with the user preset image level in the Image
Adjust Menu (see page 44).
Downloaded From projector-manual.com Sanyo Manuals
Image Level Selection
buttons to move the red
buttons to move the red frame
Image Menu
Move the red frame pointer
to the desired image level and
press the SELECT button.
This will change to Cinema
mode icon with the video
signal input.
The selected image level is check marked.
Image Menu icon
41