Safety
Part 2: Safety
Prior to Commissioning
and Operation
Intended Use
Reasonably Foreseeable
Misuse
BOGE base control for scroll compressors
2.1
2.1 General Safety Information
The following must be observed prior to commissioning and operation of the
base control:
– These instructions must be read thoroughly and understood before com-
missioning / operating the control.
– These instructions must be available at all times at the place of operation
of the control.
– Changes to parameters and settings may only be carried out by authorized,
qualified personnel, see also "Personnel Requirements".
– Work on the control that requires the switch cabinet to be opened may only
be carried out by an authorized, qualified electrician, see also "Personnel
Requirements".
– Prior to initial commissioning of the control unit, check for visible transport
damage.
– Damage to the control that affects safe operation of the machine must be
rectified immediately.
The control is intended exclusively for the correct operation of a BOGE scroll
compressor and its connected accessories.
The control is not suitable for use with other types of compressed air genera-
tors or compressors from other manufacturers.
General Safety Information
Page 5
Need help?
Do you have a question about the base control and is the answer not in the manual?
Questions and answers