Creating Pptp + Static Ip Or L2Tp + Static Ip Wan Connection - D-Link DIR-806A User Manual
Wireless ac750 multi-function router
Hide thumbs
Also See for DIR-806A:
- User manual (197 pages) ,
- Quick installation manual (49 pages) ,
- User manual (180 pages)
Table of Contents
Advertisement
DIR-806A Wireless AC750 Multi-Function Router
User Manual
Creating PPTP + Static IP or L2TP + Static IP WAN Connection
To create a connection of the PPTP + Static IP or L2TP + Static IP type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 79. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Interface
Name
Enable
Direction
MTU
General settings
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
Page 105 of 233
Configuring Device (Router Mode)
Description
Advertisement
Table of Contents
