Changing Lan Ipv4 Address - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Changing LAN IPv4 Address

This configuration step is available for the Access point, Repeater, and Client modes.
1. Select the Automatic obtainment of IPv4 address to let DIR-615 automatically obtain
the LAN IPv4 address.
If you want to manually assign the LAN IPv4 address for DIR-615, do not select the Automatic
obtainment of IPv4 address checkbox and fill in the IP address and Netmask fields and, if
needed, the Gateway IP address field. Make sure that the assigned address does not coincide
with the LAN IPv4 address of the router to which your device connects.
2. Click the NEXT button to continue or click the BACK button to return to the previous page.
Figure 30. The page for
Page 39 of 184
changing the LAN IPv4
Configuring via Web-based Interface
address.