Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ memory cards with the computer for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options.
Computer Features Speaker Touch Panel Battery Status Good Read LED Notification Scan Button Power Button Microphone...
Imager (LED/Laser Aperture) Speaker Port Camera Volume Buttons Battery...
Detach Hand Strap Detach the hand strap to access to the back of the computer.
Install a microSD Card Note: Format the microSD card before initial use.
Install the Battery The CK75 mobile computer ships with a Lithium-ion 3.7 V, 5200 mAH (19.24 Wh) battery manufactured for Honeywell Interna- tional Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
For additional information, see the user guide. We recommend the use of Honeywell peripherals, power cables and power adapters. Use of any non- Honeywell accessories or power adapters may cause damage not covered by the warranty.
Turn Power On The computer automatically turns on when you install the battery pack. Suspend Mode (Sleep Mode) Suspend mode automatically turns off all radios and internal devices not involved in saving the system state to save battery power when the computer is inactive for a programmed period of time.
About the Home Screen Title Bar (Notification / Status Bar) Search Bar Tile Bar Touch to access the Start menu.
Navigation and Function Buttons Buttons Description Function Up, Down, Move up, down, right or left on Left and the screen. Right Modifiers Press a modifier key before pressing another key to access an alternate key value or function. Alternate key values appear on the keypad overlay near the relevant key.
Scan a Bar Code Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle. Touch > Demos > Scan Demo. Point the computer at the bar code. Touch and hold the Scan button. Center the aiming beam over the bar code.
Take a Photo or Video Touch Start > Demos > Pictures & Videos. If you want to capture video, touch Menu > Video. Point the camera lens at the object you want to capture. The camera lens is located on the back of the computer. Press the Scan button to capture a single photo or start recording video.
Sync Data To sync files between your CK75 and computer: If you have a computer running Windows® 10, open the Phone Companion app from Start > All apps. If your have a computer running Windows 8 or Windows 8.1, the Windows Phone® app automatically opens when you connect the terminal to the computer using a USB charge/ communication cable.
between the computer and the CK75 or a microSD card installed in the CK75 as you would with any other storage drive (e.g., cut and paste or drag and drop). Restart the Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up.
States and/or other countries. Mac is a trademark of Apple Inc. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
Please, turn your attention
By pressing 'print' button you will print only current page. To print the manual completely, please, download it.