Table of Contents
Advertisement
USB Backup/Restore
USB Backup/Restore allows the operator to create a system backup file, and it allows the operator to use that
system backup file to restore the system.
1.
Insert a FAT32-formatted USB drive in the front-panel USB port.
2.
Select USB Backup/Restore on the System menu.
Image 6-71: System menu: USB Backup/Restore
The system detects if a FAT32-formatted USB drive is in the front-panel USB port. If the system detects no
USB drive in the USB port, the top line of the USB Backup/Restore menu reads, "USB Detected – No." If
the system detects a USB drive in the USB port, the top line of the USB Backup/Restore menu reads,
"USB Detected – Yes."
Image 6-72: USB Backup/Restore: USB Detected
To create a backup file...
1.
Select Backup Config on the USB Backup/Restore menu.
Once Backup Config is selected, the highlight bar turns from gray to cyan, and the first character of the
backup config file name is highlighted in green.
R5906167 /00
ImagePRO–4K Video Processor
Menu orientation
73
Advertisement
Table of Contents
