Event Master Toolset
Unit Adjust panel > Setup menu
For a more complete description of the Configuration menu of the Event Master Toolset GUI, see Chapter 6 of
the "Event Master Devices User's Guide" (found at the "Manuals, drawings & documentation" link on the E2
Product Support page at http://www.barco.com/td/R9004698).
ImagePRO–4K-specific programming controls
The Resources area of the Programming menu has ImagePRO–4K-specific controls on the IP4K tab. From
this tab the operator can assign a matte or a logo to an Output (Aux) channel.
106
R5906167 /00
ImagePRO–4K Video Processor
This menu provides:
•
A Lock Front Panel checkbox.
Check the box to lock the front panel; uncheck the box to
unlock the front panel.
•
A Black on invalid video checkbox.
•
A Unit Mode drop-down menu.
The options on the drop-down menu are:
-
Standard Program
-
Standard Preview
-
Matrix Preview
•
A Transition Type drop-down menu.
The options on the drop-down menu are:
-
Standard
-
Image Cut
-
Fade with Matte
-
Fade with Logo
•
A Logo Index drop-down menu that allows the operator
to assign an existing Still to be the logo.
•
Matte Color.
The matte color can be adjusted three ways.
-
Use the Red, Green, and Blue sliders to adjust the
current matte color.
-
Select a standard color from among the boxes above
the color wheel.
-
Use the color wheel.
◦
Select a color on the color wheel.
◦
Click the Learn button below the color wheel.
◦
Assign the new color to one of the boxes next to
the color wheel.
◦
Select one of the colored boxes next to the color
wheel.
Once a color is selected, it appears in the Current Color
box.